460 found, showing page 4 of 12
CLASSIC 2H KITCHEN FAUCET
Classic Series. Chrome finish. 2 acrylic knob handles. 9" long spout. 3-hole 8" center installation. 1.8 GPM (gallons per minute) flow rate. 360 deg. swivel spout, no spray. 1/2" I.P.S. connections. 1-1/2" deck thickness. Complies with California lead-free law AB1953. Lifetime faucet, parts and finish warranty to the original purchaser.
View Details
Classic Series. Chrome finish. 2 acrylic knob handles. 9" long spout. 3-hole 8" center installation. 1.8 GPM (gallons per minute) flow rate. 360 deg. swivel spout, no spray. 1/2" I.P.S. connections. 1-1/2" deck thickness. Complies with California lead-free law AB1953. Lifetime faucet, parts and finish warranty to the original purchaser.
CHROME POP-UP STOPPER
Kohler authorized original replacement part pop-up stopper with plastic stem. Chrome.
View Details
Kohler authorized original replacement part pop-up stopper with plastic stem. Chrome.
O-RING FAUCET REPAIR KIT
Kohler authorized original replacement part O-ring seal kit for kitchen faucets.
View Details
Kohler authorized original replacement part O-ring seal kit for kitchen faucets.
3/4" SWT GATE VALVE
This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
This valve is rated for a maximum of 200 P.S.I. For use with water, oil, air, and 125 P.S.I. steam. The valve should be used where full flow is desirable. Full port. Gate valves provide longest service life when used in full, open, or closed position. Nonrising, square end stem. Solder ends comply with ANSI B16.18. Cast-iron handle. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
SOAP/LOTION DISPENSER
Soap or lotion dispenser includes head, pump, and support assembly with washer, nut, and bottle.
View Details
Soap or lotion dispenser includes head, pump, and support assembly with washer, nut, and bottle.
*3/4" WATR METER COUPLING
Heavy brass construction. 125 P.S.I. threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Heavy brass construction. 125 P.S.I. threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
BASIN FAUCET
Heavy-duty chrome-plated brass construction, replaceable seat and stem. Energy efficient 2.2 GPM (gallons per minute) water saving aerator. Spout is 3.012" from middle of handle to middle of aerator. Includes both hot and cold index buttons. Import.
View Details
Heavy-duty chrome-plated brass construction, replaceable seat and stem. Energy efficient 2.2 GPM (gallons per minute) water saving aerator. Spout is 3.012" from middle of handle to middle of aerator. Includes both hot and cold index buttons. Import.
1/4" FIP CHRM BALL VALVE
Forged brass chrome-plated full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/8" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/2" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass chrome-plated full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/8" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/2" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1-1/2" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1-1/4" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" SWT BALL VALVE
Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve solder. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999a (1/2" thru 2"). CSA 3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified. CSA B16.33 (125 PSIG) 1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
2HDL LAUNDRY FAUCET
2-handle nonmetallic laundry faucet with acrylic round handles. 2.2 GPM (gallons per minute) maximum at 60 psi (pounds per square inch). Plastic construction, washerless cartridge. 4" centers, 1/2" I.P.S. connectors. 5 year warranty. Chrome finish.
View Details
2-handle nonmetallic laundry faucet with acrylic round handles. 2.2 GPM (gallons per minute) maximum at 60 psi (pounds per square inch). Plastic construction, washerless cartridge. 4" centers, 1/2" I.P.S. connectors. 5 year warranty. Chrome finish.
1" FIP GATE VALVE
Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Heavy-duty, forged brass construction, 250 P.S.I. water, oil, or air, 125 P.S.I. steam. Full flow, nonrising stem, coated aluminum handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*1-1/2" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1-1/4" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1" BRASS CHECK VALVE
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
CHECK VALVE 3/4"
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
*CHECK VALVE 1/2"
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass with brass ground seat. Rated at 150 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Threaded ends comply with ANSI B2.1. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
3/4" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
1/2" FIP GATE VALVE
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
Brass construction 125 P.S.I. water, oil, or air, at temperatures up to 210 deg. F. Solid wedge disc, full-flow, exclusive double O -ring packing, nonrising, square end stem, heavy cast-iron handle. Threaded ends comply with ANSI B2. Gate valves are designed for use in a fully open or closed position. Import. Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
PULLDOWN FAUCET W/SENSOR
PULLDOWN FAUCET W/SENSOR
View Details
PULLDOWN FAUCET W/SENSOR
3/4FIP NO-KINK HOSE BIBB
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
View Details
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
3/4MIP NO-KINK HOSE BIBB
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
View Details
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
3/4"MIP HOSE BIBB
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
View Details
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
1/2"FIP LAUNDRY VALVE
1/2" FIP x 3/4" hose thread. O-ring bonnet, satin finish, front handle.
View Details
1/2" FIP x 3/4" hose thread. O-ring bonnet, satin finish, front handle.
1/2"&3/4"SWT HOSE BIBB
Copper sweat 1/2" or 3/4" x 3/4" hose thread. O-ring bonnet.
View Details
Copper sweat 1/2" or 3/4" x 3/4" hose thread. O-ring bonnet.
3/4MIP NO-KINK HOSE BIBB
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Loose key. Lead free.
View Details
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Loose key. Lead free.
1/2"MIP HOSE BIBB
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
View Details
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
1/2FIP NO-KINK HOSE BIBB
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
View Details
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
1/2MIP NO-KINK HOSE BIBB
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
View Details
Heavy pattern rough brass and coated tee handles. O-ring bonnet. Lead free.
2-VALVE OUTLET BOX
Durable brass E-Z TURN quarter turn ball valves provide 1/2" sweat installation. The valve has Non tapered 1/2 In. threads used to secure the valve to the box and will not accept tapered threaded fitting. Easy-to-operate valves allow fingertip control of water flow. Long lasting O-rings and tough seats. Valve meets or exceeds ASME A112.18.IM standard. White color. Box dimensions: 6-1/2 In. x 7-5/8 In. x 3 In. Face plate: 10-3/8 In. x 8-7/16 In.
View Details
Durable brass E-Z TURN quarter turn ball valves provide 1/2" sweat installation. The valve has Non tapered 1/2 In. threads used to secure the valve to the box and will not accept tapered threaded fitting. Easy-to-operate valves allow fingertip control of water flow. Long lasting O-rings and tough seats. Valve meets or exceeds ASME A112.18.IM standard. White color. Box dimensions: 6-1/2 In. x 7-5/8 In. x 3 In. Face plate: 10-3/8 In. x 8-7/16 In.
CHR TRIPLEVER TRIM KIT
Trim kit for Trip Lever stop bath drain. Polished chrome finish. Fits with the following bath drains: Model No. 660PVCK, PP22675, and PP22670.
View Details
Trim kit for Trip Lever stop bath drain. Polished chrome finish. Fits with the following bath drains: Model No. 660PVCK, PP22675, and PP22670.
SINK SPRAY HOSE
Hose equipped with 1/8" I.P.S. universal hose coupling. 1 per card. Same as Rinse-Quick model No. MR-4.
View Details
Hose equipped with 1/8" I.P.S. universal hose coupling. 1 per card. Same as Rinse-Quick model No. MR-4.
4' BLK KITCHN SPRAY HOSE
4' hose to replace any automatic On/Off thumb control spray for ledge or deck mounted faucets. 1/8" I.P.S. universal hose coupling. Will fit 1/8 M, or 1/4 M faucet fitting. Same as Rinse-Quick model No. MR-422-4.
View Details
4' hose to replace any automatic On/Off thumb control spray for ledge or deck mounted faucets. 1/8" I.P.S. universal hose coupling. Will fit 1/8 M, or 1/4 M faucet fitting. Same as Rinse-Quick model No. MR-422-4.
